CEN Racing Kits

G82028 Hobbywing 150Amp ECS WP-8BL RTR V2 Reeper/ColossusXL

2023 M-SPORT FORD PUMA RALLY1.   1/8 RTR 4WD

**Battery and charger are not included**

**Recommend 2S - 3S Lipo Battery**

Item # 8999

Features:

* ESC  

- 100A WP-MAX10-SCT-100A-3S RTR Sensorless with T-Plug (powered by HobbyWing).

- 2-3S Li-po (Lithium-polymer) or 6-9 Cell Ni-Mh Batteries.

- Water-Proof and Dust-Proof for All Weather.

- Super Internal Switch-Mode BEC with 6V / 7.4V for Usage with High Voltage Servo.

- Built-In Capacitor Module.

- Automatic Throttle Range Calibration.

- Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.

- Over-Heat Protection and Throttle Signal Loss Protection.

- 5 Levels of acceleration/punch.

- 9 Levels of maximum brake force.

 * Motor

- CEN Racing High Performance 3658 3000KV Brushless Motor (Sensorless).

 * Servo

- 12Kg Metal Gear Servo (By Savox).

4.8V - 0.26 sec/60° 10.0 kg-cm.

6.0V - 0.23 sec/60° 12.0 kg-cm.

With 25T Horn Gear Spline.

 * Radio System

AMP-30 TX 3-Channel Transmitter.

Frequencies: 2.4GHz.

- Digital Trimming.

- Steering Dual-Rate (ST D/R) Adjustment.

- End Point Adjustment (EPA).

- Build in Failsafe.

Power Supply: 4 - AA Alkaline (Not Included).

 AMP30 RX 3-Channel Receiver.

    Frequency: 2.4GHz.

    Power Supply: DC 4.8 ~ 6.0V.

    Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

Body:

- Official Licensed 2023 M-Sport Ford Puma Rally 1 Edition

- Fully Detailed Injection-Molded Body Accessories Body Details

Size: Length 20.08inches (510mm) / Width 9.45 inches (240mm)

Chassis:

- 3mm Aluminum Chassis

- Front and Rear 3mm Aluminum Shock Towers

- Aluminum Arm Brace

- Full Precision Ball Bearing Support

- Wider Body Mount Positions for Better Support

- Front Skid plate with Durable Foam Bumper

- Injection-Molded Rear Diffuser

- Easy Access Battery Tray

- Battery Tray Size 142mm x 48mm

 Suspension:

- Aerodynamic Lower Arm Suspension Design

- Big Bore Oil Filled Adjustable Coil Over Shocks

- 12mm Over Size Shock Body with 3mm Hardened Steel Polished Shaft

- Racing Spring

- Adjustable Turnbuckles

- Adjustable Wheelbase +/- 6mm

Gear Ratio:

- Spur / Pinion 46/14T 3.29:1

- Ring & Pinion 40/17T 2.35:1

Drivetrain:

- Full Time 4-Wheels Drive

- Center Shaft Drivetrain for more power transferred to the wheels

- Metal Transmission Gears

- Aluminum Adjustable Motor Mount

- Oil Filled Two Differential Drive System      

- Center Direct Drive

- Hight Efficient Transmission System

- 6 Gear Bevel Gear Type Differential

- Front / Rear Harden Steel Dog Bone and outdrives

Wheel: High Impact & Light Weight WRC Racing Wheel 56 X 35.50 mm.

 Tires:  High Performance Racing Rubber Compound Tires 56 x 80 x 35.50 mm.

Specs:

 Chassis Length:  18.11 inches (460mm)

Chassis Width:   9.06 inches (230mm)

Wheelbase:  11.80 inches (300mm)

Ground Clearance:      0.98 inches (25mm)

Weight:      5.51 lb. 2.5kg

 8993 Ford F250 KG1 Edition Lifted Truck Burnt Copper - RTR

Ford F-250 Super Duty Custom Truck Specs

Features:

RGB LED Light:      

- Stander Under Fender Multicolor RGB LED.

* ESC - 40A WP-1040-Brushed (By HobbyWing).

- Water-Proof and Dust-Proof for All Weather.

- Built-In Capacitor Module.

- Automatic Throttle Range Calibration.

- Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.

- Over-Heat Protection and Throttle Signal Loss Protection.

* Motor

- RS-540 High Torque Brushed Motor.

* Servo

- 12Kg Metal Gear Servo (By Savox).

4.8V - 0.26 sec/60° 10.0 kg-cm.

6.0V - 0.23 sec/60° 12.0 kg-cm.

25T Horn Gear Spline.

* Radio System

- Pistol-Grip Mod-3S 3 Channel Transmitter.

- Digital Trimming.

- Steering Dual-Rate (ST D/R) Adjustment.

- End Point Adjustment (EPA).

- Build in Failsafe.

Transmitter Model: 82190

    Frequencies: 2.4GHz

    Weight: 375gm

    Power Supply: 4 - AA Alkaline (Not Included).

-Receiver

Receiver Model: G82191

    Frequency: 2.4GHz

    Power Supply: DC 4.8 ~ 6.0V

    Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

Body:

Official Licensed by Ford Motor

- F-250 Super Duty.

- Scale Realistic Body Details.

- Black Bed Liner Coating.

- hard Molded Front & Rear bumpers with build in 3mm LED housing

Chassis:

- Steel Frame Rails.

- CMS (Chassis Mounted Servo) Chassis Design.

- Stamped Steel Shock Hoops.

- Steel Skid Plate.

- Full Precision Ball Bearing Supported.

- Adjustable Turnbuckles.

- High Torque Servo Saver Horn.

- Easy Access Battery Tray.

- Battery Tray Size 146 x 50 x 25mm.

Suspension:

- Custom Lifted Suspension Design.

- 110mm Big Bore Oil Filled Adjustable Coil Over Shocks.

- 12mm over size shock body with 3mm Hardened Steel Polished Shaft.

- Harden Steel Steering Drag Link.

- CNC Machined 6mm Aluminum Linkage.

- Front / Rear Sway Bar.

Drivetrain:  

- Full Metal Transmission Gears.

- 4 Wheels Drive.

- Center Shaft Drivetrain for More Power Transferred to the Wheels.

- Hight Efficient Transmission System.

- Wide Range Easy Changeable Gear Box Design.

- Sealed Transmission Case.

- Sealed Axle Housing.

- Metal Planetary Gear Type Differential.

Gear Ratio:

- Hi / Speed Ratio 1.56:1

- Hi / Torque Ratio 2.8:1

- Spur / Pinion Gear 32p85/32p12T

- Ring & Pinion Gear30/15T 2:1

Wheel:          

Official Licensed by KG1 Forged

-KF004 Vile Wheel.

-66.50mm x 37.5mm.

Tires:    

Official Licensed Fury Tires

-Low Profile Country Hunter tires.

-65 x 100.50 x 38.50 mm.

Specs:

Item Number: 8992 / 8993

F-250 Super Duty

1/10 Scale 4 wheels Drive Lifted Custom Truck

Length:          25.6 inches (650mm).

Width:            10.04 inches (255mm).

Wheelbase: 16.02 inches (407mm).

Ground Clearance: 3.54inch (90mm).

Weight:         5.51 lb. 2.5 kg.

Battery Recommend : 2S 5000mah Lipo Battery with dean connector

8992 Ford F250 KG1 Edition Lifted Truck Daytona Blue - RTR

Ford F-250 Super Duty Custom Truck Specs

Features:

RGB LED Light:      

- Stander Under Fender Multicolor RGB LED.

* ESC - 40A WP-1040-Brushed (By HobbyWing).

- Water-Proof and Dust-Proof for All Weather.

- Built-In Capacitor Module.

- Automatic Throttle Range Calibration.

- Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.

- Over-Heat Protection and Throttle Signal Loss Protection.

* Motor

- RS-540 High Torque Brushed Motor.

* Servo

- 12Kg Metal Gear Servo (By Savox).

4.8V - 0.26 sec/60° 10.0 kg-cm.

6.0V - 0.23 sec/60° 12.0 kg-cm.

25T Horn Gear Spline.

* Radio System

- Pistol-Grip Mod-3S 3 Channel Transmitter.

- Digital Trimming.

- Steering Dual-Rate (ST D/R) Adjustment.

- End Point Adjustment (EPA).

- Build in Failsafe.

Transmitter Model: 82190

    Frequencies: 2.4GHz

    Weight: 375gm

    Power Supply: 4 - AA Alkaline (Not Included).

-Receiver

Receiver Model: G82191

    Frequency: 2.4GHz

    Power Supply: DC 4.8 ~ 6.0V

    Dimensions: 1.35” (L) x 0.72” (W) x 0.53” (H).

Body:

Official Licensed by Ford Motor

- F-250 Super Duty.

- Scale Realistic Body Details.

- Black Bed Liner Coating.

- hard Molded Front & Rear bumpers with build in 3mm LED housing

Chassis:

- Steel Frame Rails.

- CMS (Chassis Mounted Servo) Chassis Design.

- Stamped Steel Shock Hoops.

- Steel Skid Plate.

- Full Precision Ball Bearing Supported.

- Adjustable Turnbuckles.

- High Torque Servo Saver Horn.

- Easy Access Battery Tray.

- Battery Tray Size 146 x 50 x 25mm.

Suspension:

- Custom Lifted Suspension Design.

- 110mm Big Bore Oil Filled Adjustable Coil Over Shocks.

- 12mm over size shock body with 3mm Hardened Steel Polished Shaft.

- Harden Steel Steering Drag Link.

- CNC Machined 6mm Aluminum Linkage.

- Front / Rear Sway Bar.

Drivetrain:  

- Full Metal Transmission Gears.

- 4 Wheels Drive.

- Center Shaft Drivetrain for More Power Transferred to the Wheels.

- Hight Efficient Transmission System.

- Wide Range Easy Changeable Gear Box Design.

- Sealed Transmission Case.

- Sealed Axle Housing.

- Metal Planetary Gear Type Differential.

Gear Ratio:

- Hi / Speed Ratio 1.56:1

- Hi / Torque Ratio 2.8:1

- Spur / Pinion Gear 32p85/32p12T

- Ring & Pinion Gear30/15T 2:1

Wheel:          

Official Licensed by KG1 Forged

-KF004 Vile Wheel.

-66.50mm x 37.5mm.

Tires:    

Official Licensed Fury Tires

-Low Profile Country Hunter tires.

-65 x 100.50 x 38.50 mm.

Specs:

Item Number: 8992 / 8993

F-250 Super Duty

1/10 Scale 4 wheels Drive Lifted Custom Truck

Length:          25.6 inches (650mm).

Width:            10.04 inches (255mm).

Wheelbase: 16.02 inches (407mm).

Ground Clearance: 3.54inch (90mm).

Weight:         5.51 lb. 2.5 kg.

Battery Recommend : 2S 5000mah Lipo Battery with dean connector

CEN Racing official Licensed FORD F450 SD KG1 Wheel Edition 1/10 4WD RTR (Grey Titanium) Custom Truck DL-Series.

True 1/10 scale RTR. Body length 26.7 inch (678.18mm) true body scale truck.

Item: 8982 - Red Candy Apple

Item: 8983 - Silver Mercury

Item: 8980 - Blue Galaxy

Item: 8985 - Grey Titanium

* KG1 FORGED Trident-D wheels.  Front 35mm, Rear 31mm per wheel

* REALISTIC textured bed linear coating

* 90mm Aluminum pewter anodized shock housing

* Black Anodized lower and upper links

* RED anodized shock springs

ESC-40A WP-1040-Brushed (Powered by HobbyWing):

• Water-proof and dust-proof for all weather
• Built-In Capacitor Module
• Automatic throttle range calibration
• Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
• Over-Heat protection and throttle signal loss protection
• Easily programmed with jumpers

Motor-RS-550 high Torque Motor - Power By Mabuchi Motor

Servo -12Kg Servo O.E.M. by Savox:

• 4.8V 0.26 sec/60deg 10.0 kg-cm
• 6.0V 0.23 sec/60deg 12.0 kg-cm
• 25T Horn Gear Spline

Radio System:

• Pistol-Grip AMP 30 3 Channel Transmitter
• Digital Trimming
• Steering Dual-Rate (ST D/R) Adjustment
• End Point Adjustment (EPA)
• Built in Failsafe

Chassis:

- Steel Frame Rails
- CMS (Chassis Mounted Servo) Chassis Design
- Stamped Steel Shock Hoops
- Steel Skid Plate
- Full Precision Ball Bearing Support
- Adjustable Turnbuckles
- High Torque Servo Horn Safer

Suspension:

- 3 Links Suspension with Panhard Bar Design

- Big Bore Oil Filled Adjustable Coil Over Shocks
- Harden Steel Steering Drag Link
- Aluminum shock housing

- 90mm shock housing

- 6mm Aluminum Linkage

Drivetrain:

• Sway bar included
• 4 Wheel Drive
• Center Shaft Drive Train for more power transferred to the wheels
• Highly Efficient Transmission System
• Wide Range Easy Changeable Gear Box Design
• Sealed transmission eliminates dirt and dust
• Sealed Axle housing
• 5mm Hardened Steel Axle shaft
• Differential Center Locker Front/Rear Planetary Gear Type
• Metal Transmission Gears
  
• Planetary Gear type Differential

Specs:

Length: 26.70inch (678.18mm)
Width: 11.41inch (290mm)
Wheelbase: 17.60inch (447mm)
Ground Clearance: 2.52inch (64mm)
Weight: 2.51 lb. 2.5kg

Battery:

Battery and Charger not included

Recommended 2s 5000ma Lipo

CEN Racing official Licensed FORD F450 SD KG1 Wheel Edition 1/10 4WD RTR (Blue Galaxy) Custom Truck DL-Series.

True 1/10 scale RTR. Body length 26.7 inch (678.18mm) true body scale truck.

Item: 8982 - Red Candy Apple

Item: 8983 - Silver Mercury

Item: 8980 - Blue Galaxy

Item: 8985 - Grey Titanium

* KG1 FORGED Trident-D wheels.  Front 35mm, Rear 31mm per wheel

* REALISTIC textured bed linear coating

* 90mm Aluminum pewter anodized shock housing

* Black Anodized lower and upper links

* RED anodized shock springs

ESC-40A WP-1040-Brushed (Powered by HobbyWing):

• Water-proof and dust-proof for all weather
• Built-In Capacitor Module
• Automatic throttle range calibration
• Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
• Over-Heat protection and throttle signal loss protection
• Easily programmed with jumpers

Motor-RS-550 high Torque Motor - Power By Mabuchi Motor

Servo -12Kg Servo O.E.M. by Savox:

• 4.8V 0.26 sec/60deg 10.0 kg-cm
• 6.0V 0.23 sec/60deg 12.0 kg-cm
• 25T Horn Gear Spline

Radio System:

• Pistol-Grip AMP 30 3 Channel Transmitter
• Digital Trimming
• Steering Dual-Rate (ST D/R) Adjustment
• End Point Adjustment (EPA)
• Built in Failsafe

Chassis:

- Steel Frame Rails
- CMS (Chassis Mounted Servo) Chassis Design
- Stamped Steel Shock Hoops
- Steel Skid Plate
- Full Precision Ball Bearing Support
- Adjustable Turnbuckles
- High Torque Servo Horn Safer

Suspension:

- 3 Links Suspension with Panhard Bar Design

- Big Bore Oil Filled Adjustable Coil Over Shocks
- Harden Steel Steering Drag Link

- Aluminum shock housing
- 6mm Aluminum Linkage

- 90mm shock housing

Drivetrain:

• Sway bar included
• 4 Wheel Drive
• Center Shaft Drive Train for more power transferred to the wheels
• Highly Efficient Transmission System
• Wide Range Easy Changeable Gear Box Design
• Sealed transmission eliminates dirt and dust
• Sealed Axle housing
• 5mm Hardened Steel Axle shaft
• Differential Center Locker Front/Rear Planetary Gear Type
• Metal Transmission Gears
  
• Planetary Gear type Differential

Specs:

Length: 26.70inch (678.18mm)
Width: 11.41inch (290mm)
Wheelbase: 17.60inch (447mm)
Ground Clearance: 2.52inch (64mm)
Weight: 2.51 lb. 2.5kg

Battery:

Battery and Charger not included

Recommended 2s Lipo

This is the CEN Racing Fiat Abarth 595 1/12 Scale 2WD Monster Truck. Officially licensed CEN Racing Q-series Fiat ABARTH 595 RTR. 1/12 scale Solid Axle 2WD (4WD optional upgrade) Monster Truck, with wheelie bar, Hobbywing 40A ESC, Savox servo, and big bore oil shocks.

Servo:

6Kg Servo O.E.M. by Savox
4.8V 0.16 sec/60deg 4.2 kg-cm
6.0V 0.14 sec/60deg 6.5 kg-cm
25T Horn Gear Spline
Radio System:

Pistol-Grip Mod-3S 3 Channel Transmitter
Digital Trimming
Steering Dual-Rate (ST D/R) Adjustment
End Point Adjustment (EPA)
Build in Failsafe
Power Alarm Transmitter Model: 82190
Frequencies: 2.4GHz
Weight: 375gm
Power Supply: 4 AA Alkaline Dry Cells DC 6V
Chassis:

DVP (Dual Vertical Plate) Chassis Design
Sealed Receiver Compartment
Easy Access/Quick Release Battery Tray
Battery Tray Size 146x50x25mm
Adjustable Wheelie Bar Ready (w/Ball Bearing)
Full Precision Ball Bearing Support
Adjustable Turnbuckles
Harden Steel Steering Drag Link
Fully Equipped with Allen Hex Screws
Adjustable Body Post
High Torque Servo Saver
Optional 4-Wheel Steering Design
Suspension:

Big Bore Oil Filled Coil Over Shocks
Aluminum Shock Caps
10mm over size shock body with 3mm hardened steel polished shaft
Stiff Hard Racing Spring
Fixed Wheelbase
Ride Height- Adjustable with pre-load
Realistic 4-Link Suspension design
Drivetrain:

2 Wheel Drive
Center Shaft Drive Train for more power transferred to the wheels
Hight Efficient Transmission System
Wide Range Easy Changeable Gear Box Design
Sealed transmission eliminates dirt and dust substances to get in
Sealed Axle housing
5mm Hardened Steel Axle shaft
Differential Metal Center Locker Front/Rear Planetary Gear Type
Ring & Pinion 30/15T
Length: 11inch (280mm)
Width: 10.60inch (270mm)
Wheelbase: 6.9inch (175mm)
Ground Clearance: 2.6inch 65mm

Battery and Charger not included

This is the CEN Racing Hyper Lube 1/10 Scale 4WD RTR Monster Truck.

ESC-40A WP-1040-Brushed (Powered by HobbyWing):

Water-proof and dust-proof for all weather
Built-In Capacitor Module
Automatic throttle range calibration
Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
Over-Heat protection and throttle signal loss protection
Easily programmed with jumpers
Motor -RS-550 High Torque Motor -Powered By Mabuchi Motor

Servo -12Kg Servo O.E.M. by Savox:

4.8V 0.26 sec/60deg 10.0 kg-cm
6.0V 0.23 sec/60deg 12.0 kg-cm
25T Horn Gear Spline
Radio System:

Pistol-Grip Mod-3S 3 Channel Transmitter
Digital Trimming
Steering Dual-Rate (ST D/R) Adjustment
End Point Adjustment (EPA)
Built in Failsafe
Power Alarm Chassis:

DVP (Dual Vertical Plate) Chassis Design
Sealed Receiver Compartment
Easy Access/Quick Release Battery Tray
Battery Tray Size 146x50x25mm
Adjustable Wheelie Bar Ready (w/Ball Bearing)
Full Precision Ball Bearing Support
Adjustable Turnbuckles -Harden Steel Steering Drag Link
Fully Equipped with Allen Hex Screws
Adjustable Body Post
- High Torque Servo Saver
Optional 4-Wheel Steering Design
Suspension:

8 Big Bore Oil Filled Coil Over Shocks
Aluminum Anodized Shock Caps
10mm over size shock body
3mm hardened steel polished shaft
Stiff Hard Racing Spring
Fixed Wheelbase
Ride Height- Adjustable with pre-load
Realistic 4-Link Suspension design
Drivetrain:

Sway bar & wheelie bar included
4 Wheel Drive
Center Shaft Drive Train for more power transferred to the wheels
Highly Efficient Transmission System
Wide Range Easy Changeable Gear Box Design
Sealed transmission eliminates dirt and dust
Sealed Axle housing
5mm Hardened Steel Axle shaft
Differential Center Locker Front/Rear Planetary Gear Type
Ring & Pinion 30/15T
Length: 16inch (405mm)
Width: 12.20inch (310mm)
Wheelbase: 10.82inch (275mm)
Ground Clearance: 3.14inch (80mm)
Weight: 4.85 lb. 2.2kg
Wheel: Deep Dish 2.2-inch (55mm) Monster Truck Wheel Tires: Monster Truck V-Pattern Tire 55x136x74mm

Battery and Charger not included

8936 Suzuki Jimny (Yellow) 1/12 Scale 2WD RTR Monster Truck Q-Series

CEN's new Reeper American Force Edition 1/7 Scale 4WD RTR Truck. A Hobbywing 150A ESC, 1450kV Brushless motor, Savox 12Kg-cm steering servo, and a new adjustable LiPo battery tray that makes installing dual 3S packs simple and convenient.
The American Force Edition comes with officially-licensed Fury All-terrain tires mounted on Legend SS8 wheels with an additional +10mm offset (compared to the standard Colossus XT) for a wider, more aggressive stance. Best of all, over 95% of the Colossus XT parts are compatible with the American Force Edition.

Specifications:

VEHICLE TYPE:  Monster Truck
BUILD TYPE:  Ready to Run
POWER TYPE:  Electric Power
SCALE: 1/7
SKILL LEVEL:  Skill Level 1

Requires:

• 2S Hard Case LiPo battery packs (2 required)
• Charger for LiPo batteries
• AA Alkaline batteries (4 required)
• Modeling Tools

8937 Suzuki Jimny (Metallic Blue) 1/12 Scale 2WD RTR Monster Truck Q-Series

This is the CEN Racing FORD B50 4WD 1/10 Scale Ford RTR Monster Truck. Based on a real truck, this is an officially licensed 1979 Ford F600 crew cab front end with a 1979 Bronco rear bed! The headlights and light bar have built in buckets, and are 3mm LED ready! Wheelie bar included. Hobbywing 40A waterproof ESC & Savox servo are standard. A realistic full roof rack and side mirrors are some of the awesome details and killer innovations.

CM0820 ESC WP-MAX10 100A-3S-RTR

CQ0821 Savox RTR-08 Servo (12KG)

CQ0820 Savox RTR-06 Servo (6KG)